1.5 HP with a Higher Flow Rate

Don’t let the smaller tank fool you into thinking that the E1.2B3F1 is weak. As a matter of fact, most prefer the compact tank sizes because they can get the job done safely and efficiently. Why spend more to get more than you’ll ever need? The 1.5 HP motor is strong enough to handle lifting applications on all of BendPak’s low-rise lifts, as well as some of their full-sized lifts. Plus, the single-phase, 50/60 Hz design is super-efficient; when you use it on a low-rise car lift, you’ll be able to get to the lift’s max capacity in only 30 seconds.

Perhaps the best feature of the E1.2B3F1 is its design. It boasts a fixed-volume hydraulic circuit with an optimized pressure-sensitive relief valve. When the system pressure exceeds 2,500 PSI, the valve will open automatically and allow fluid to bypass rapidly and safely. The valve will automatically close when the pressure levels return to normal. A hydraulic power unit with an optimized relief valve is essential for the shops that need to operate heavy loads worry-free.

Once you have the “down” button pressed, the mounted power unit requires less electricity compared to its ascent. This is done by the hydraulic power unit’s careful engineering, which accounts for the pull of gravity on the lift. Additionally, the entire case of the unit is sealed, which then protects the motor from outside elements that could damage it, such as weather, oil, dust, debris, etc. If that weren’t enough, the E1.2B3F1 is capable of working in a temperature range of -13-175°F. You’ll never need to worry if it’s too cold or too hot to operate this unit.

Worried about safety? The E1.2B3F1 is completely CE Approved, which means you can rest easy.