null
BendPak

BendPak HDSO14P 14,000-lb. Capacity Open Front Car Lift

Write a Review
SKU:
5175152
UPC:
5175152
Availability:
FACTORY SHIPPED
Shipping:
Free Shipping
  •  BendPak HDSO14P 14,000-lb. Capacity Open Front Car Lift
  •  BendPak HDSO14P 14,000-lb. Capacity Open Front Car Lift
  •  BendPak HDSO14P 14,000-lb. Capacity Open Front Car Lift
  •  BendPak HDSO14P 14,000-lb. Capacity Open Front Car Lift
  •  BendPak HDSO14P 14,000-lb. Capacity Open Front Car Lift
  •  BendPak HDSO14P 14,000-lb. Capacity Open Front Car Lift
  •  BendPak HDSO14P 14,000-lb. Capacity Open Front Car Lift
  •  BendPak HDSO14P 14,000-lb. Capacity Open Front Car Lift
  •  BendPak HDSO14P 14,000-lb. Capacity Open Front Car Lift
  •  BendPak HDSO14P 14,000-lb. Capacity Open Front Car Lift
  •  BendPak HDSO14P 14,000-lb. Capacity Open Front Car Lift
  •  BendPak HDSO14P 14,000-lb. Capacity Open Front Car Lift
$11,585.00
$9,970.00
— You save $1,615.00

Description


bendpak-authorized-dealer.gif
BendPak HDSO14P 14,000-lb. Capacity Open Front Car Lift
The HDSO14P is a legendary 14,000-lb. capacity open-front four-post car lift that allows easy entry and exit beneath a vehicle. It is available with optional drive-thru ramps, drip trays and rolling jacks

 

pdf.catalog.jpg pdf.instructions.jpg ali-etl-logo.jpg 5-2-1-warranty.jpg

Quick Specs

Lifting capacity: 14,000 lbs. / 6,350 kg

Max capacity / Front Axle: 7,000 lbs. / 3,175 kg

Max capacity / Rear Axle: 7,000 lbs. / 3,175 kg

Overall width / Front: 151" / 3,632 mm

Overall width / Rear: 138" / 3,301 mm

Outside length: 215-1/2" / 5,473 mm

Overall length: 244" / 6,198 mm 

Four-Post Lifts by BendPak

HDSO14P

SKU# 5175152

14,000-lb. Capacity / Four-Post Lift / Open-Front


The HDSO14P is a legendary 14,000-lb. capacity open-front four-post car lift that allows easy entry and exit beneath a vehicle. It is available with optional drive-thru ramps, drip trays and rolling jacks.

14p.jpg

Capacity

Lifting Capacity*14,000 lbs. (6,350 kg)
*Max Capacity / Front Axle7,000 lbs. (3,175 kg)
*Max Capacity / Rear Axle7,000 lbs. (3,175 kg)

Rise

A - Min. Runway Height:7.625" (194 mm)
B - Max. Rise:70" (1,778 mm)
C - Max. Lifting Height:77.625" (1,972 mm)
Time to Full Rise:60 seconds
 
D - Overall width (FRONT)143” (3,632 mm)
E - Overall Width (REAR)130” (3,301 mm)
F - Outside Length 215.5" (5,473 mm)
G - Overall Length 244" (6,198 mm)
H - Height of Columns (FRONT)105" (2,664 mm)
I - Height of Columns (REAR)103” (2,613 mm)
J - Width Between Columns (FRONT)123” (3,124 mm)
K - Width Between Columns (REAR)120” (3,046 mm)
L - Drive-Thru Clearance 97” (2,464 mm)
M - Runway Width20" (508 mm)
N - Length of Runways 199" (5,054 mm)
O - Width Between Runways 45" (1,143 mm)
P - Runway Centerline 65" (1,651 mm)
Q - Outside Edge of Runways 85" (2,159 mm)

Minimum Wheelbase

Rated Capacity:140" (3,556 mm)
75% Capacity:120" (3,048 mm)
50% Capacity:100" (2,540 mm)
25% Capacity:80" (2,032 mm)

Locking

Locking Positions:13
Lock Spacing:Every 4" (102 mm)

Power Unit

Motor:220 VAC / 60 Hz / 1 Ph
Noise:45 dB

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

 

Features

  • 14,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Huge cable sheaves reduce wear and tear
  • Extremely convenient open-front design for easy access
  • Extended runway length for servicing
  • Longer approach ramps for low ground clearance vehicles
  • Electric / hydraulic power system
  • Runways include rail-kit for optional accessories
  • Runways adjust for different tread widths
  • Automatic leveling system with multiple auto-leveling locking positions
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks, and sheaves
  • Internal anti-sway slider blocks in each column
  • Pneumatic push-button safety release
  • Features heavy-duty 1/2" aircraft cable
  • Safety locks enclosed in columns minimize pinch points
  • Oversized sheave diameter reduces cable fatigue
  • Runways feature non-skid surface
  • Rugged, self-lubricating cable sheaves
  • Features 1-3/8” sheave axles
  • Multi-position safety locks in each column
  • Independent backup slack-cable safety latches
  • Includes fully adjustable lock stops for precise leveling
  • Integrated rolling bridge airline kit option available
  • Roll-back kit options available
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional 7,000-lb. capacity rolling jacks available (Model RJ-7)

 

Open-Front Capability in a Powerful Four-Post Lift

The HDSO14P is an open-front four-post lift that features clear entry upfront, providing easy vehicle access. A generous 14,000-lb. lifting capacity and extended runways allow you to service a wide variety of vehicles, ranging from small cars to full-size trucks.

Open-front design

We engineered the HDSO14P without a front cross bar, so operators can easily enter and exit from beneath the vehicle. Now the process of front-end adjustment becomes quick and trouble-free. This model is a must-have for busy alignment bays.

Patented, adjustable front outrigger tubes

For precise front-lift leveling, nothing beats our patented adjustable front outrigger tubes. The infinitely adjustable pitch compensates for excessive loads and unlevel floors.

Dependable design

Four heavy-duty, high-quality, stainless steel lifting cables and a single hydraulic cylinder mounted underneath the runway make this lift the most durable, maintenance-free lifting system on the market.

Oversize dual-hub cable sheaves

Huge 10.5” diameter cable sheaves within the runway and cross tubes work with massive 2.25” diameter sheave axles to improve cable wear and critical component lifespan. Dual‐hub cable sheaves reduce stress, fatigue and wear. Naturally, this means a lot less money in service-related expenses down the road.

Multi-level locking positions

The HDSO14P is equipped with multiple adjustable height locking positions for variable-height parking. A convenient push-button pneumatic safety lock control releases all four independent safety locks simultaneously.

Heavy-duty aircraft cable

Each lift is supplied with four high-quality 1/2” diameter, 6 x 25 stainless steel lifting cables rated at 14,400 lbs. each. The combined rating of these cables is more than 411% of the maximum lifting capacity of the entire lift! This aircraft‐quality cable was specifically designed for lifting applications and provides a great balance between abrasion resistance and fatigue.  And we make sure it looks tidy too—all lifting cables are fully enclosed within the lift structure itself.

Maintenance-free electric hydraulic

A maintenance‐free electric hydraulic power system assures ultimate dependability.

Grease nipples

Grease nipples are located on every sheave and sheave axle to make lubrication maintenance a breeze.

Electric / hydraulic power system

We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.

Large base plates

12” x 10” base plates provide a solid foundation for the HDSO14P.

Non-skid runways

This car lift gives you maximum grip, even when the runway surface is wet or oily.

Longer approach ramps

These approach ramps were designed a little longer to help when loading low ground-clearance vehicles. It’s the little bit that makes a big difference.

Integrated design

Lifting cables, airlines, safety latches and sheaves are all fully enclosed.

Integrated hydraulic flow

An integrated hydraulic flow restrictor provides a controlled descent in the unlikely event of an unexpected hose rupture.

Automatic safety locks

Aircraft-quality stainless steel and aluminum pneumatic cylinders release all four locks simultaneously with the simple push of a button. The spring-loaded safety locks automatically engage continuously as the lift is raised. For added safety, a secondary lock system acts as a slack-cable device to engage in the unlikely event of cable failure.

Optional 7,000-lb. capacity rolling jacks

The optional 7,000-lb. capacity rolling bridge jack (the R​BJ7000) lets operators perform full wheel and brake service to vehicles. They sit along the inner edges of each runway, engage the lift points and quickly lift the wheels off the ramps. These are essential tools for anyone who wants to get the most out of their four-post lift.

 

 

View AllClose

Warranty Information

Warranty Better Products – Better Service – Better Value For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability. Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first. » Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure » Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit » One Year (12-Months) Labor Warranty on site or at factory » One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance Click here for full details.
View AllClose

0 Reviews

View AllClose