Commercial Application

As the costs of commercial and residential development increase, gaining additional parking spaces in the same useable space provides instant value. Autostacker mechanical parking systems are designed to increase parking density and cut costs over traditional parking methods. There are, of course, other ways to add parking spaces. In-ground parking requires a construction crew to excavate into a conventional basement, which is extremely costly and difficult, not to mention messy. If you need to dig down or add levels to existing parking areas, you’re looking at costs ranging from $35,000 to $50,000 per stall. When using Autostacker parking systems, you’ll find that you are able to store vehicles in a much tighter space than typically required for individual parking units. A normal parking stall requires around 300 – 350 square feet for the stall, plus a moderate amount of clearance for drive aisles. Autostacker’s floor space requirement is just 200 square feet, and again, that delivers you two spaces, not just the one.

Optional Removable Deck Panels

Love the Autostacker but worry that it isn't made for maintenance? Worry no more! Now you can easily replace four of the standard galvanized deck sections with this useful welded-steel sub-frame assembly. Removable aluminum center panel provides a large 51.5" x 30" opening and features an attractive diamond-plate design. Add one or up to three replacement kits for a totally open-center parking lift experience.

Simple, Dependable Operation

The operator power console features simple ergonomic controls that are crafted with the user’s well-being in mind. A dependable hydraulic drive system provides reliable power that requires very little service and maintenance over time. Tandem drive cylinders, combined with an intelligent hydraulic circuit, balance the hydraulic pressure accurately between the twin lifting cylinders for precise, equalized lifting of the platform. Removable covers provide easy access for simple routine maintenance and service.

Safety

Our promise to deliver a safe parking lift is the most important commitment we make in order to earn your trust and ensure your absolute satisfaction. As part of our commitment to operator care, we incorporate the highest level of security features into every lift we build. Our standard power console features include the following: key-switch disconnect provides an additional measure of security against operator tampering; emergency stop button disables lift at any time; warning light and audible alarm indicate when the lift is in operation; automatic safety latches and locking systems that engage continuously as the lift rises; lowering systems that require two-hand operation; ergonomic placement of operator controls; and of course, all control systems are within safe reach for easy shut-off when the lift is in use. The waist-height control panel also includes full-faced, simple-to-read instructions with pictographs that outline easy set-up and operation, including descriptive safety and operator warnings. From its secure key-lock safety switch and easy to understand operator controls and its smart control layout, operators will be pleasantly surprised at how easy it is to safely operate. Autostacker provides helpful manuals and publications that are made available through your Autostacker dealer. Maintenance and parts manuals, as well as operator manuals, can be ordered using the serial number found on your lift. If you have never used a mechanical parking system or would like details about providing a training program for your work or commercial business, ask your Autostacker dealer about training options.

Value-Driven Design

Consider how Autostacker’s small footprint and virtually flush base frame design allows for tighter turning and increased maneuverability making vehicle positioning on and under the lift a whole lot easier. Unlike other surface mounted parking lifts with multiple columns, elevated outrigger tubes and large equalizing bars, only the Autostacker with none of these hindering elements allows for precise vehicle maneuvering in even the most confined areas of your garage space or operation. The versatility of the Autostacker car parking system makes it the right lift for several reasons. To start with, it is ready to tackle demanding indoor or outdoor use even on asphalt surfaces and it offers the perfect solution for safely storing cars, trucks and SUV’s inside your garage or vehicle storage facility. And if that weren't enough, these rugged auto parking lifts increase the value of your property. When you realize just how many ways the innovative and truly unique Autostacker can benefit your operation, you'll discover the true value that only Autostacker can provide. Only Autostacker gives you two spaces in one for less than any other comparable option. Because it is smartly designed using a simple and commercially tested hydraulic power system, it not only delivers a smooth and more controlled operation, but it dramatically decreases the amount of maintenance and service costs that plague typical mechanically operated systems with chains, cables and complicated electronics. When you combine these benefits with the Autostacker’s optional master power unit capable of powering up to ten lifts on a single motor, this will likely be the most versatile parking lift you’ll soon come to love. Rapid rise and descent speeds are delivered through a dependable hydraulic circuit that provides precise, equalized lifting without the need for complicated electronics that often fail when subjected to high-use and soiled or damp work environments. With the simple press of a button, your vehicle is elevated and an added parking space is instantly created. No more parking outdoors or cramming into undesirable parking spaces. It’s just that easy.

Vehicle Security & Protection

Want the ultimate in security against vandalism and vehicle theft? Park your car almost eight feet in the air! Many of our clients appreciate the added value of parking their car up and out of the way, clear of everyday threats and chance occurrences that plague defenseless cars left idle in their surroundings. Maybe you’re one who adores cats but hates finding unsightly paw prints all over your car; maybe unruly animals are treating your sparkling clean wheels as their own personal urinal; perhaps your car has taken on a secondary role as your kids’ backstop. In any case, whatever your car parking phobia may be, you’ll be instantly relieved when you realize your vehicle is parked high and out of range of kids, pets, and vandals. https://s3-eu-west-1.amazonaws.com/cdn.production.aws.eu-w1.pimberly.com/public/asset/raw/6655a5808fca1c6491641d5c/727072cb/675b63b671b786310d000053/Autostacker%20in%20garage%208-Edited.jpg Vehicles parked below the Autostacker are protected by a barrier that prevents nearby swinging car doors from making contact with your car; it also protects your prized possessions against scratches, dings and dents often caused by toys, bikes, trashcans or other property being carelessly hauled through garage aisles. Without the advantage of wrap-around perimeter protection, your vehicle can be easily dented, a common occurrence in parking spaces everywhere. In both home garages and commercial settings, the Autostacker acts as vehicle sentry, guarding against the calamities of typical garage chaos and clutter.

Low-Profile, Full-Width Deck

The Autostacker features our patent-pending, low-profile, gradual sloping lift platform. This somewhat insignificant-sounding feature plays a very significant role when it comes to driving on and off the lift platform. While most other car lifts feature a level deck with an aggressively angled entry ramp, we’ve purposefully designed the Autostacker with a full-width, gradually sloping platform that reduces the height at the approach end, making vehicle entry and exit an easy, pain-free affair. With a barely noticeable incline of just 5 degrees, Autostacker easily accommodates Corvettes, Porsches, Vipers, Mustangs, BMWs, Ferraris and other high-performance cars with wide tires and/or low ground clearance. https://s3-eu-west-1.amazonaws.com/cdn.production.aws.eu-w1.pimberly.com/public/asset/raw/6655a5808fca1c6491641d5c/727072cb/675b63b671b786310d000057/autostacker_a6w-opt1_parking-lifts_5175282_lifestyle.jpg

Cushioned Door Protection

Autostacker’s patented Door-sentry™ car door protectors include a full-length design that accommodates a wide variety of door types, shapes and heights. Regardless of whether your car doors sit high or low, if they’re opened up quickly and carelessly, Autostacker’s impact-cushioning door guards are ready to protect them from dings, scratches and dents. By providing this extra level of security, the Autostacker gives you peace of mind, protecting your car when you can’t.

Quality

Our commitment to quality is uncompromised. Our dedication to taking your parking challenges to the next level extends well beyond the physical reach of our products. Our advanced yet simple design enables our lifts to perform effortlessly and tirelessly, year after year, with very little maintenance or service required. After all, we can’t expect you to be a parking lift expert—that’s our job. Featuring rugged, welded steel construction, very few moving parts and an uncomplicated fluid power system, the hydromechanical Autostacker offers the most economical and dependable method of lifting to deliver you many years of trouble-free service.

Workplace Environmental Responsibility

Firm in our commitment to deliver a more comfortable environment for the operator and those in the surrounding area, a whispering 52 decibels means Autostacker parking lifts are less noisy than a typical household appliance. Our passion for providing an enjoyable environment for the operator extends beyond low noise levels. Ergonomic controls, mitigated trip hazards and extra tall lifting height means increased operator safety and headroom and comfort providing more productivity.

Control Each Autostacker Individually

With a conveniently placed forward or aft configuration, you're able to control each Autostacker unit with the push of a button.

Zero-Post Construction Saves Space

The parking lift structure is only as wide as it needs to be, fits into a normal parking space and easily holds light-duty trucks, crossovers and SUVs.

Never Worry About Scratched Undercarriages

The patented design of Autostacker’s parking platform inclines gently from the loading ramp to the wheel trough. Autostacker makes loading smooth, safe and worry free.

Autostacker Puts Safety First

Autostacker offers five lock positions that engage continuously as the parking lift rises, so there’s literally nothing you need to do other than press the Up and Down buttons to engage or release the locks.

No Door Dings Here

Patented Door-Sentry™ car door protectors are made from energy-absorbing rubber to protect against accidental scratches or door dings.

• Key-switch disconnect fully disables operation for enhanced security
• Audible alarm and warning buzzer alerts operator and bystanders when the lift is in operation
• Accommodates cars, light trucks and SUVs  
• Rugged, welded-steel construction is strong and durable
• 100%  hot-dipped, galvanized steel platform
• Attractive slate gray, baked-on powder coat finish provides added toughness
• Front wheel dish acts as a wheel chock to prevent vehicles from rolling forward or backward
• Full-width, gradual sloping platform reduces entry ramp height
• Automatic safety locks engage at five different parking heights
• Simple push-button controls
• Dual, direct-drive hydraulic lifting cylinders  
• Dependable hydraulic circuit that provides precise, equalized lifting
• Variable height parking accommodates a wide range of vehicle and ceiling heights
• Contoured scissor legs provide rigidity, decreased deflection and a low collapsed height
• Full-width, straight-through axles increase overall stability and tracking through the vertical travel range
• Full-width pivot pins promote straighter tracking of the scissor legs throughout travel—vital for eccentric loads
• Extra-wide, heavy-duty steel scissor arms with cross member bracing enhance stability
• Unique clevis-design scissor ends lower stress and increase rigidity by distributing loads symmetrically over the pins
• Patented asymmetric scissor arms provide greater underside door clearance