Atlas Equipment is pleased to introduce the Atlas® 12ASL 12,000 lb alignment scissor lift. This lift has been in production for several years and hundreds of these lifts have been sold throughout the world except for the North America.

Our Asian partner developed this lift in a joint venture with one of the most prestigious Italian lift manufacturers. The combination of the Italian engineering and design coupled with the low cost of the Asian labor has resulted in an alignment lift that is equal to or better than similar big name lift brands costing two and three times as much money.


The Atlas® alignment lift has a lifting height of over seven feet so that it may be floor mounted or recessed if the customer decides on a flush mount installation. The full frame under the scissor lift provides for maximum stability. 

All Atlas® alignment scissor lifts can be surface mounted or flush mounted. Each lift comes with approach ramps for the floor mounted application or an optional set of ramps if the customer decides to flush mount the lift. Check the technical specifications to better understand how the extra high lifting height allows the Atlas® 12K alignment scissor to be flush mounted and still offer plenty of room under the runways to properly access the underside of the vehicle.

The extra long 53" long approach ramps make it easy to load low riding vehicles. 

Once a vehicle is positioned on the Atlas® alignment scissor lift, the optional Atlas® RJ-6 rolling jack can lift the vehicle off of the runways to perform wheel service. The air powered hydraulic Atlas® RJ-6 rolling jack has telescoping arms that extend over the runways to access lift points. These jacks have screw out extensions or optional stack on truck adapters.

Welded rails on the inside of the runways are standard on all lifts, allowing the customer the option of incorporating the Atlas® RJ-6 rolling jack system on his Atlas® alignment scissor lift.

Quality workmanship, ease of operation, straight forward installation instructions, a durable powder coat finish and the lowest prices in the Industry makes the Atlas® 12ASL 12,000 alignment scissor lift the perfect choice for the demanding and discriminating shop owner. 

Worried about bay space? An Atlas Alignment System allows the customer to utilize a minimum amount of space and still be able to align the smallest foreign car all the way up to a one ton dual rear wheel pickup truck. 

The Atlas® RJ-6 rolling jack is the perfect accessory for either the Atlas® 12 AWFSL or Atlas® 12 ASL alignment racks. The Atlas® RJ-6 (6,000 lbs. capacity) air/hydraulic rolling jack may also be used on competitive scissor lifts and four post lifts that have welded rails on the inside of the runways.

The "wheels free" system that is built into many of the Atlas® scissor lifts is designed to reach and lift most vehicles. Some customers like to use the rolling jacks to lift either the front or the rear of the vehicle at one time.

Whether you are fan of the Atlas® "wheels free" system or enjoy the versatility offered by the rolling jacks, Greg Smith Equipment has the solution for you. Many customers buy the alignment racks with the "wheels free" option and also buy one or two of the Atlas® RJ-6 rolling jacks so they are prepared for any vehicle that needs wheel service.

Important: The Atlas® RJ-6 is designed and engineered to operate on "delivered" air pressure of between 70-105 PSI. If you exceed 105 PSI, you may damage your jack. For more information on the recommended operating air pressure of the Atlas® RJ-6, Click Here.

 

Atlas® 12ASL 12,000 LB Alignment Scissor Lift Specifications
Lifting Capacity												12,000 LB
Lifting Height												84 1/4" (7' 1/4")
Overall Width												86 3/8" (7' 2 3/8")
Overall Length with Approach Ramps												250" (20' 10")
Overall Length without Approach Ramps												197" (16' 5")
Approach Ramp Length												53" (4' 5")
4-Wheel Alignment Wheelbase												Max. 168 in. Min.  90 in.
2-Wheel Alignment Wheelbase												Max. 172 in. Min.  86 in.
Runway Width												23 3/4" (1' 11 3/4")
Lowered Height												11 1/2"
Locking Positions												19
Width Between Runways												39"
Motor/Electrical Requirement												220 volt +/- 5% (209-231volts) single (1) phase. A 30 amp breaker is required.
Shipping Weight												5000 lbs.

---

Atlas® RJ-6 Rolling Jack Specifications
Maximum Width	64 1/2"
Minimum Width	30 1/2"
First Locking Position	7 1/4"
Second Locking Position	15"
Minimum Pad Height	3 1/2"
Maximum Lifting Height	17 5/8"
Maximum Capacity	6,000 LB.
Recommended Operating Air Pressure (PSI)	70-105 PSI
Shipping Weight	350 LB.