null
ATLAS

Atlas® 9KBP Baseplate 2 Post Lift XH-9KBP

Write a Review
SKU:
ATEXH-9KBPX-FPD
UPC:
ATEXH-9KBPX-FPD
Availability:
FACTORY SHIPPED
Shipping:
Free Shipping
  • Atlas® 9KBP Baseplate 2 Post Lift XH-9KBP
  • Atlas® 9KBP Baseplate 2 Post Lift XH-9KBP
  • Atlas® 9KBP Baseplate 2 Post Lift XH-9KBP
  • Atlas® 9KBP Baseplate 2 Post Lift XH-9KBP
  • Atlas® 9KBP Baseplate 2 Post Lift XH-9KBP
  • Atlas® 9KBP Baseplate 2 Post Lift XH-9KBP
$2,749.00

Description

 

logo-atlas-equipment.gif

ATLAS ® 9KBP Baseplate 2 Post Lift XH-9KBP-MTG 

pdf.instructions.jpg2-1silver.gif


he Atlas® 9KBP is a base-plate two-post lift designed for low ceiling garages. The total column height of 111 ½" (9 feet 3 ½ inches) allows this lift to be installed in almost any professional or home garage with a ceiling as low as 9 feet 6 inches. 

The Atlas® 9KBP features dual hydraulic chain-drive cylinders,symmetric arms, and automatic arm restraints. Atlas® 9KBP two post “chain over roller” lifts have a spring loaded Secondary Lock System (SLS) that automatically engages in the event of a slack or broken chain. 


 

 Atlas® 9KBP Specifications  
Capacity 9,000 LB.
Lifting Time Ask Your Salesperson
Overall Height 111 ½" (9' 3 ½")
Overall Width 142" (11' 10") (With Power Unit)
134 ½" (11' 2 ½")
Outside Column to Outside Column 124 7/8" (10' 4 7/8")
Maximum Lift Height 74 ½" (6' 2 ½")
Minimum Arm Height 4"
Base Plate Width 10 ¾"
Inside Column 110" (9' 2")
Drive Thru 101" (8' 5")
Column Size 7 ¼" x 11 1/8"
Column Thickness of Steel 5mm
Carriage Thickness of Steel 6mm
Arms Thickness of Steel 6mm
Cable Diameter .375"
Base Of Lift 13 ½" x 18 ¼"
Motor/Electrical Requirement 3 HP 220V single (1) phase.
A 30 amp breaker is required.
Oil Requirement 3-5 Gallons AW32/AW46
Shipping Weight 1,400 LB.

 

Requires a minimum of 4" of concrete with 3000 psi.

All lifts come with a step by step instruction manual.

 

 

 

View AllClose

Warranty Information

ATLAS Equipment Sales offers a two year LIMITED structural parts warranty on all Atlas Lifts. Atlas Equipment Sales warrants the equipment to the original purchaser against defects in material or workmanship under normal use for a period of one year from the date of purchase. This limited warranty shall be limited to the repair or replacement of materials or parts found defective, at the discretion of . Our LIMITED warranty policy (two year parts only) does not include a labor warranty. Our products are sold at such a competitive price that Atlas Equipment cannot afford to send technicians into the field to repair the Atlas wheel balancers. We assume that the buyer of our wheel balancer is mechanically inclined or has employees that are mechanically inclined. Our wheel balancers are built with “plug and play” parts that make repairs very easy. This is the same philosophy that the Personal Computer Industry has used for many years. We offer a toll free number (800-768-4104) for service and parts information. This toll free number is directed to Atlas Indianapolis, IN. location. The service and parts department is open from 8 am to 5 pm EST from Monday to Friday. The department is SOMETIMES open on Saturdays, subject to the availability of our service technicians. There are certain parts that are considered “wear items” and are NOT included in the one year warranty. Parts that have been subjected to abuse will NOT be considered for warranty. REPEAT: IF YOU ABUSE YOUR WHEEL BALANCER (LIKE PLUG A 110 VOLT CORD INTO A 220 VOLT OUTLET, USE YOUR WEIGHT HAMMER INSTEAD OF YOUR FINGERS TO ENTER PARAMETERS INTO THE KEYPAD, OR DRIVE YOUR CAR INTO THE SIDE OF THE BALANCER AND BEND THE SHAFT) THEN THE WARRANTY ON YOUR BALANCER IS VOID. If you think that a wheel balancer should perform flawlessly for many years WITHOUT a normal amount of maintenance; then do not buy our wheel balancer. You are living in a fantasy world. Our LIMITED warranty policy (one year parts) requires the alleged defective part to be returned to Atlas Equipment Sales (freight ppd.-customer pays the freight) BEFORE the replacement part can be sent out. If the defective part is an integral part of the machine, and the loss of this part will not allow the machine to work properly, Atlas Equipment Sales can waive the “normal” return policy in certain situations so there is minimal down time for the operator. If necessary Atlas Equipment Sales can charge the customer’s credit card for the replacement part when the part is shipped and then credit the amount of the part when the defective part is returned. To expedite a part replacement or exchange, the use of a digital photo is the best answer. If the customer will furnish Atlas Equipment Sales with digital photos that identify a broken part or some other issue; then our service techs may waive the need for an old part to be returned. The replacement part can be shipped the same day. A digital photo leaves nothing to the imagination. Our service technicians can only help if they are provided with the most accurate information. We encourage the use of digital photos to help speed the process. Atlas Equipment has a service department with an excellent reputation. The old adage that compares the attitude of the customer to the type of service received rings true for Atlas Equipment Sales. We sell quality products with very few warranty issues. When there is a warranty issue (or an out of warranty issue) we want to get the customer back in business as quickly as possible. A good attitude from the Atlas service technician coupled with a positive attitude from the customer will produce a satisfactory outcome for both parties. Returned goods must be authorized to be returned (in writing) by Atlas Equipment Sales and must be prepaid to a designated location. All returns are subject to a 15% handling/restocking charge. Returned goods must be in like-new condition complete with warranty and original shipping papers. If you have any questions about our products or warranties, please ask your sales representative.
View AllClose

0 Reviews

View AllClose